Buy Comtrend COM-PG-9172PoE PLC 1000 Mbps Standard + af PoE and get the best price!

Comtrend COM-PG-9172PoE PLC Refurbished

Comtrend COM-PG-9172PoE PLC Refurbished

Comtrend - COM-PG-9172PoE-RFB2

    55.97 € 33.58 € 33.58 EUR

    55.97 €

    67.72 € 40.63 € with taxes

    Esta combinación no existe.

     Add to cart

    Powerline Ethernet + 802.3af PoE Bridge Adapter 10/100/1000 Mbps Standard


    Device: Good condition, accessories included

    Packaging: Original packaging, worn

    Comtrend COM-PG-9172PoE


    Powerline Ethernet + 802.3af PoE Bridge Adapter 10/100/1000 Mbps Standard

    The PowerGrid 9172PoE, with ITU-T and IEEE 802.3af PoE standard, provides up to 15 W power output and better quality data transmission for high-speed networking to easily turn on a PoE-enabled device such as an IP Surveillance camera. It allows users to extend a local area network via existing power lines, eliminating the need for extra wiring, with no additional power supply required for Powered Device (PD). Installation at home (or in a small office) is quick and easy as the PowerGrid 9172PoE comes with plug-and-play technology.

    The PowerGrid 9172PoE supports Multiple Input/Multiple Output (MIMO) operation based on G.9963. It can be used with two fully programmable reception and transmission paths to attain the best data throughput. The PowerGrid 9172PoE comes pre-programmed allowing easy installation / configuration and it features secure end-to-end encryption algorithms for safeguarding the network integrity.


    MIMO Performance
    Supports ITU-T G.9963 baseband plans MIMO 50MHz techniques for powerline throughput up to 800 Mbps PHY rate with Robust Communication Mode (RCM) to prevent noise interference from other home appliances.


    High Speed Data Transmission
    High speed (up to 1 Gbps Phy Rate) dramatically increases the performance of next-generation home entertainment applications such as multiple high definition (HD) TV over IP (IPTV), 3DTV streaming and VoIP, digital video recorder (DVR) networking and media center servers.


    Built-in IEEE 802.3af power supply: No Extra Wires Needed
    Local area network and PSE powering can be extended and eliminated via the power line network and an Ethernet cable.


    Simply One-Button-Pairing, Plug & Play
    Quick and easy connections with embedded plug-and-play, no extra configuration required!


    Extends Connecting Range & Eliminates
    Dead Spots
    Power line technology is capable of actually covering more than 95% of a typical household area and also provides the convenience for mobile coverage.


    More Outlets than Other Wired Solutions
    On average, there are 45 power outlets and only 3-5 cable or phone outlets in a household, therefore making power lines a more convenient solution for extending networks.


    With advanced data encryption capability, the power line networks are safer and more secure.




    RJ-45 X 1 for Ethernet connection and for 44 – 57 VDC

    input power to PoE.802.3af

    AC power plug X 1


    Standard IEEE 802.3/ and IEEE 802.3af

    10/100 Mbps BaseT auto-sense

    Auto rate and duplex negotiation

    MDI/MDX support


    OFDM, FEC, Flexible frequency configuration

    Data Rate

    Up to 800 Gbps Phy rate on PLC transmission


    HTTP Web-based

    TR-069 Supported (Optional)


    AES 128 bits encryption ensures total data security

    One Button Security Set-up

    Configuration button for factory reset

    Networking Protocols

    802.1D Ethernet Bridge

    802.1Q VLAN

    Quality of Service (QoS)

    IGMP(IPv4) Snooping & MLD(IPv6) Snooping

    Built-in dual TCP/IP stack (IPv4/IPv6)


    110-240 VAC 50Hz/60Hz

    Environment Condition

    Operating temperature: 0 ~ 40 degrees Celsius

    Relative humidity: 8 ~ 95% (non-condensing)


    EU/UK/French/NA/Israel/India version: 93mm(H) x 38 mm (W) x59mm(D)


    CE, FCC, ITU-T Standard

    Note: Specifications are subject to change without notice

    Esta es una vista previa de los productos vistos recientemente por el usuario.
    Una vez que el usuario haya visto al menos un producto, este fragmento será visible.

    Recently viewed products