Milesight WS558 is a LoRaWAN® smart light controller that allows occupants to centrally control lights on eight circuits. With remote and time-based ON/OFF, WS558 allows to improve the overall efficiency of electricity consumption in buildings such as offices, shopping malls, hospitals and schools.
Switch type WS558
Control more lights than type LN
Maximum load 5A per switch
8 passive switches
Controls up to 8 lighting circuits
Start with flexible lighting control
More lights connected to one controller, fewer switch panels, lower wiring costs.
Centralized control of 8 lighting circuits and each circuit can be controlled respectively.
remote and time-based ON/OFF
Up to 18 hours of timing
Remote control from a smartphone anywhere.
Set timers and schedules for lights to operate automatically.
Multiple scenes based on Milesight D2D Communication
The Milesight D2D with LoRa protocol allows communication between different Milesight LoRaWAN® node devices without a LoRaWAN® gateway.
Easy to test light status
WS558 supports local switch button control and allows testing the light status without network connection after powering on the device.
Real-time alarming through Milesight IoT Cloud
Overcurrent protection prevents damage to the connected lights and the intelligent controller itself due to short-circuit and overload.
Shutdown memory function
Never bother to reconfigure again
In the event of a power failure, the current configuration will be saved and the WS558 will return to the previous operating state after power has been restored.
Milesight IoT Cloud
Compatible with Milesight IoT Cloud to monitor and control device status at your fingertips.Compatible con Milesight IoT Cloud para monitorear y controlar el estado del dispositivo al alcance de su mano.
Comprehensive reporting on voltage, current, power and cumulative energy consumption for more accurate measurement of energy consumption.
Easy configuration (via NFC)
Step 1 Install the Milesight toolbox.
2nd Step Enable NFC and run ToolBox, then connect your phone to the device.
3rd Step Verify the password and start configuring.