Tycon Systems Solar Charger Controller TCP-SC24-20-MPPT

[TCP-SC24-20-MPPT] Tycon Systems Solar Charger Controller TCP-SC24-20-MPPT

    130.28 € 111.67 € 111.67 EUR

    130.28 €

    157.64 € 135.12 € with taxes

    Esta combinación no existe.

     Add to cart

    Solar Charger Controller


    TCP-SC24-20-MPPT

    Solar Charger Controller 12/24V 20A,20A

    • 12/24V Autodetect 20A MPPT Smart Temp Compensated Solar Charge Controller with Status Display and Load Control
    • Detects 12V or 24V Battery and Automatically Adjusts, Supports WET AGM GEL Lithium and Custom Battery Charging
    • Status Display Showing Solar Voltage,Solar Current, Battery Voltage, Battery Current, Load Current
    •  20A Solar Input and 20A Positive Ground Load out
    • Modbus Interface for Remote Monitoring and Control, DIN Rail Mounting Kit Included
    • MPPT Temperature Compensated 20A Charging
    • Fully Automatic Operation
    • LCD Displays: Battery Volts, Battery Temp, Battery Level, Load Current and Solar Current
    • Autoranging 12V or 24V Battery Arrays
    • Multimode Load Operation – 5 selectable modes
    • Soft Start 20A Load Output to Power High Capacitive Loads
    • Automatic 30day Battery Equalization
    • Conformal Coated Electronics for Environmental Protection
    • TVS lightning protection, Industrial Temperature Range
    • Low self consumption <1W



    The Tycon Solar TP-SC24-20-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The battery temperature probe is included. The controllers are auto-ranging to accommodate 12V and 24V battery systems. They are designed to charge Flooded, AGM, GEL or Lithium batteries. They also have a USER setting for customizable battery charge settings.

    They have full electronic protections for short circuit, reverse current, over-power, over-voltage, over-charge, overdischarge and over-temperature. The built-in over-discharge protection and low self consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. All protections are auto-recovery.

    An automatic battery equalization charge automatically engages once every 30days (Programmable). The equalization charge helps to balance the batteries in an array and reduce the possibility of battery sulfation.

    Connections are via 6 screw terminals for wire size up to 10AWG. The controllers are internally fused for protection, but we recommend always using an external 20A fuse between the controller and the battery. There are four screw holes for wall mounting. In addition, there are two DIN Rail brackets for DIN Rail mounting included.

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products