Adaptador de fibra y alimentación F-POE-G2 Ubiquiti

[UBN-F-POE-G2] Adaptador de fibra y alimentación F-POE-G2 Ubiquiti

    32.21 € 25.54 € 25.54 EUR

    32.21 €

    38.97 € 30.90 € with taxes

    Esta combinación no existe.

     Add to cart

    Fiber + Power Solution for Outdoor PoE Devices

    Ubiquiti FiberPOE G2 

    Fiber + Power Solution for Outdoor PoE Devices

    Overcome PoE limitations with the next-generation FiberPoE, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.

    Separate Data and Power Transport

    PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE Gen 2 provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE Gen 2 device as an Fiber‑to‑Ethernet Converter, or a pair of FiberPoE Gen 2 devices to create a Fiber Bridge.

    Enhanced Surge Protection Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection. The added GDT support effectively protects against lightning and other power surges.

    Fiber Optic Data Transport Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE Gen 2 supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.






    196.4 x 93.5 x 32.4 mm

    ( 7.73 x 3.68 x 1.28")


    288 g

    (10.2 oz)


    White Polycarbonate

    Interface Connections

    (1) 1 Gbps SFP Port

    (1) DC Terminal Block

    (1) DC RJ45 Port DC Injection

    (1) 1000 Mbps Ethernet PoE Port1

    Typical Power Consumption


    Power Method

    DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or

    4-Pair (24VDC or 50VDC Input) Passthrough

    PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or

     4-Pair (24VDC or 50VDC Input) PoE Passthrough

    PoE Output PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or

    4-Pair (24VDC or 50VDC) PoE

    DC Output Terminal Block, 2-Wire (24VDC or 50VDC)

    Input DC Voltage

    16 to 57V

    Surge Protection

    Built-In High-Current Gas Discharge Tube

    for DC Terminal Block and PoE Port


    White: Power On

    Blue: Connected

    Blue (Flashing): Activity

    Operating Temperature

    -40 to 60° C2

    (-40 to 140° F)

    Operating Humidity

    10 to 95% Noncondensing

    ESD/EMP Protection

    ± 24kV Contact / Air for Ethernet


    CE, FCC, IC

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products