Enlace PtP de 60 GHz UBB-2 Ubiquiti

[UBN-UBB-2] Enlace PtP de 60 GHz UBB-2 Ubiquiti

    513.08 € 424.83 € 424.83 EUR

    513.08 €

    620.83 € 514.04 € with taxes

    Esta combinación no existe.

     Add to cart

    60 GHz PtP link using 802.11ad with 5 GHz radio for backup. Ideal for high-
    throughput connectivity with a range of up to 500 m

    Ubiquiti UniFi UniFi Building-to-Building Bridge

    60 GHz PtP link using 802.11ad with 5 GHz radio for backup. Ideal for high-throughput connectivity with a range of up to 500 m

    The UniFi Building-to-Building Bridge, model UBB, is the ideal solution for high-throughput connectivity with a range of up to 500 m. Integration with the UniFi Controller makes bridging two networks seamless.

    Comprised of two pre-paired endpoint devices, the UBB delivers a Point-to-Point (PtP) link – up to 1.7+ Gbps bi-directional – using 802.11ad technology on the low-interference 60 GHz radio band. For backup, a 5 GHz radio using 802.11ac technology is available.

    60 GHz Operating Frequency

    The 60 GHz band attenuates quickly due to atmospheric absorption. When a 60 GHz radio – such as the UBB – uses a highly directional antenna, inteference from other directions is also attenuated. The 60 GHz band thus offers extremely high transmission capacity as a wireless wire.

    Wireless Link Redundancy

    60 GHz is highly directional and any obstacle in the line of sight – even rain – can drop signal levels.

    To maintain connectivity, the UBB can fail over to the 5 GHz radio. The 5 GHz radio band propagates better and uses radio wave reflections and refractions more effectively, although it offers lower maximum throughput.

    Pre-Paired Configuration

    Setup is quick and easy: the UBB radios are pre-paired out of the box so you can use the UniFi app for simultaneous adoption.

    The UniFi Controller software enables intuitive management of individual UniFi devices and site-wide deployments.

    Sleek Industrial Design

    The UBB is designed with a compact form factor for discreet integration into any environment.

    Convenient Alignment

    The UBB pivots on its ball joint 3-axis mount for easy aiming.

    Mounting Versatility

    No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting. A wall mount kit, model NBE-WMK, is available as an optional accessory to enhance stability.




    140 x 140 x 90 mm


    376 g

    Antenna Gain

    2.4 GHz (BLE)

    5 GHz

    60 GHz


    2 dBi

    10 dBi

    17.2 dBi



    Max. TX Power (EIRP)

    5 GHz

    60 GHz


    25 dBm

    32 - 36.5dBm

    60 GHz Elevation Beamwidth


    60 GHz Azimuthal Coverage






    (1) 10/100/1000 Ethernet Port



    UV-Resistant Polycarbonate

    Power Method

    802.3af Supported

    Passive Power over Ethernet (48V)

    Power Supply

    UniFi PoE Switch 48V, 0.32A Gigabit

    PoE Adapter (Included)

    Max Power Consumption


    Wind Loading

    56 N @ 200 km/h (12.6 lbf @ 125 mph)

    Wind Survivability

    200 km/h (125 mph)


    Pole-Mount (Kit Included)

    Wall-Mount (Not Included)

    ESD/EMP Protection

    ± 24kV Contact/Air

    Operating Temperature

    -40 to 60° C (-40 to 140° F)

    Operating Humidity

    5 to 95% Noncondensing


    CE, FCC, IC

    UBB diagram

    Esta es una vista previa de los productos vistos recientemente por el usuario.
    Una vez que el usuario haya visto al menos un producto, este fragmento será visible.

    Recently viewed products