Mikrotik RB5009UPr+S+OUTOutdoor 2.5 Gigabit Ethernet Router, RouterOS L5 License
As a network administrator, you never know when the next windstorm, lightning, flood, heat wave or power outage will strike, but with the right tools you can protect your network from most problems!
The Mikrotik RB5009UPr+S+OUT:
easy to deploy
works well in ANY weather
provides extensive power redundancy
can be connected via most common networking interfaces
Tiene una CPU que es lo suficientemente fuerte como para aprovechar al máximo los más potentes Software de redes en el mundo – RouterOS v7
Adding an IP66-rated waterproof enclosure to the RB5009 series allowed us to meet all requirements! The new RB5009UPr+S+OUT is a compact and cost-effective solution that will revolutionize your network tower configurations.
Like the indoor version, this RB5009 has 7 Gigabit Ethernet ports, a 2.5 Gigabit Ethernet port, a 10G SFP+ cage and a full-size USB3 port.
Extensive power redundancy: the unit offers 9 possible forms of power supply. There is a 2-pin power connector on the front, as well as PoE input and output on the eight Ethernet ports. The board can use any of these sources for power, choosing the one with the highest voltage when multiple sources are available. RB5009 requires up to 21 W to power itself. If it is using PoE input, the board will stay on even if 8 of its 9 power supplies are suddenly cut off - unprecedented redundancy!
All power supply options support a wide voltage range from 24 to 57 V. However, the voltages cannot be mixed.
Each PoE output port can supply up to 25 W of power. All ports combined are limited to 130 W, which should be sufficient for most configurations. You can specify the maximum power available from your power sources manually, if necessary. If you are using PoE output to power other devices, you must provide power through the 2-pin connector to power them.
This product also features single voltage PoE output: it can support 802.3at/af OR low voltage PoE output. This is determined by the voltage at the 2-pin connector, as no voltage conversion is performed on this board.
When it comes to processing power and available use cases, this router can do it all: PPPoE termination, DHCP for clients, local queuing, MPLS Push/Pop/Swap and MPLS forwarding, VPLS/VXLAN termination, hardware bridging and much more.
The RB5009 series continues to redefine affordable reliability for small, medium and even large ISPs!
