Ruijie RG-AP880-E - 6E Tri-radio 7.780 Gbps Wi-Fi Indoor Access Point
Ruijie RG-AP880-E - 6E Tri-radio 7.780 Gbps Wi-Fi Indoor Access Point
Ruijie - RG-AP880-E /shop/product/rg-ap880-e-ruijie-rg-ap880-e-6e-tri-radio-7-780-gbps-wi-fi-indoor-access-point-19212Indoor Wi-Fi 6E Tri-radio 7.780 Gbps Access Point.
RG-AP880-E Indoor Wi-Fi 6E Tri-radio Access Point 7,780 Gbps
The RG-AP880-E is a 6E Wi-Fi wireless access point that offers three radios, high performance and enterprise-grade encryption. Its hybrid cloud management mode and high-density access design allow the RG-AP880-E to be flexibly deployed in high-end network scenarios, such as classrooms, dormitories and large venues in the education industry, outpatient clinics and mobile ward rounds in the medical industry, and large conference centers in the government and commercial industries.
Ultra-high performance
Tri-band design (2.4 GHz + 5 GHz + 6 GHz), six spatial streams, high-speed access with 1024 Quadrature Amplitude Modulation (QAM) and peak data rate up to 7.780 Gbps, enabling you to enjoy high-speed wireless access Wi-Fi 6E technology to leverage 6 GHz spectrum resources and deliver data rate up to 4, 8 Gbps on the 6 GHz radio, providing a supreme wireless experience to users RF power tuning and intelligent channel allocation to solve problems such as co-channel interference and adjacent channel interference, thus improving the efficiency and stability of network transmission.
Flexible networks
Local and cloud management modes and intelligent wireless network optimization, reducing TCO and maximizing ROI.
Optical and Ethernet cable access for flexible networks and high-speed backhaul over 5 Gbps wired links.
IEEE 802.11k/v/r support, optimized roaming adherence and client address, achieving seamless roaming and enhanced user experience.
Advanced IoT features: PoE output, Bluetooth 5.1 and wireless location.
High safety and reliability
Encryption and authentication technologies including Wi-Fi Protected Access 3 (WPA3), enhanced open security, 802.1X and pre-shared private key (PPSK), which improves data security Dynamic Frequency Selection (DFS), optimizing the use of the available RF spectrum to avoid interference in the radar channel.
Cyclic delay/cyclic shift diversity (CDD/CSD), maximum ratio combining (MRC), space-time block coding (STBC) and low-density parity check (LDPC), which improves signal quality, signal reception and data transmission reliability and performance.
Beamforming transmission (TxBF) extends signal coverage and improves the reliability of specific devices, thus improving data rate.
Intelligent identification and monitoring, multicast-to-unicast conversion and other features, improving network security and reliability.
Key features:
High-density indoor wireless access point with Wi-Fi 6E 802.11ax support.
Tri-radios, eight spatial transmissions, maximum data rate of 7.780 Gbps.
Radio 1: 2.4 GHz: two spatial transmissions, 2x2 MU-MIMO, maximum data rate 574 Mbps.
Radio 2: 5 GHz: four spatial streams, 2x2 MU-MIMO, maximum data rate of 2.4 Gbps.
Radio 2: 6 GHz: four spatial streams, 4x4 MU-MIMO, maximum data rate of 4.8 Gbps.
802.11a/b/g/n/ac/ax, switching between Fat, Fit and Cloud modes, and 802.3af/at/bt PoE and local DC power supply.
Note:
The power supply equipment (PSE) must be purchased separately.
The DC power supply must be purchased separately and the output voltage/current must be 54V/1.1A.
Main functions:
Adaptability to multiple scenarios, providing flexible solutions to meet diverse service needs.
5G optical port and 5G electrical port for flexible networks.
Upgraded to Wi-Fi 6E, a combined data rate of up to 7.780 Gbps.
PoE and DC power supply, flexible implementation.
Unified WIS cloud management, intelligent O&M.
Features:
Adaptability to multiple scenarios
The RG-AP880-E, a wall-mounted tri-band wireless access point, is ideal for a wide range of applications, including higher education, government, general education, finance and business, providing flexible solutions to meet diverse service needs.
High-speed access and compatibility
The RG-AP880-E supports multiple wireless protocols, including 802.11ax, 802.11ac Wave2, 802.11ac Wave1 and 802.11n. It features a hardware-independent three-radio design to deliver a data rate of up to 7.780 Gbps, effectively eliminating wireless performance bottlenecks. In addition, it supports a wide range of devices, promoting seamless interconnectivity between employees and customers.
Security and scalability
The RG-AP880-E features outstanding wireless network security, RF control, mobile access, QoS assurance, seamless roaming and IoT module expansion. With Ruijie's wireless access controller (AC), it enables wireless user data forwarding, security, access control and IoT application expansion to address various service needs.
Flexible implementation and power supply
The RG-AP880-E supports local power supply and Power over Ethernet (PoE), giving you the flexibility to choose the power supply mode. In addition, the RG-AP880-E can be mounted against a wall or ceiling, making space implementation and environmental requirements less challenging. This makes the RG-AP880-E especially suitable for scenarios such as large campuses, conference centers, corporate offices and points of operation.
| Hardware Specifications | RG-AP880-E | ||
| 802.11n | Four spatial streams ● Radio 1 – 2.4 GHz: 2x2 MIMO, two spatial streams ● Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz and 40 MHz Combined peak data rate: 600 Mbps ● Radio 1 – 2.4 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15 ) ● Radio 2 – 5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) | ||
| 802.11ac | Two spatial streams ● Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 1.732 Gbps ● Radio 2 – 5 GHz: 6.5 Mbps to 1.732 Gbps (MCS0 to MCS9) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) | ||
| 802.11ax | Eight spatial streams ● Radio 1 – 2.4 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams ● Radio 2 – 5 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams ● Radio 3 – 6 GHz: 4x4 uplink/downlink MU-MIMO, four spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz ● Radio 3 – 6 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 7.780 Gbps: ● Radio 1 – 2.4 GHz: 8.6 Mbps to 0.574 Gbps (MCS0 to MCS11) ● Radio 2 – 5 GHz: 8.6 Mbps to 2.402 Gbps (MCS0 to MCS11) ● Radio 3 – 6 GHz: 8.6 Mbps to 4.804 Gbps (MCS0 to MCS11) Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA) , support monitor mode Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) WPA3 | ||
| Other protocols | 802.11i: WPA2-AES. 802.11e: EDCA 802.11d: Operating frequency bands are country-specific. 802.11h: Dynamic Frequency Selection (DFS) | ||
| Antenna | Wi-Fi ● 2.4 GHz: two built-in omnidirectional antennas, the max. antenna gain is 5.4 dBi. ● 5 GHz: two built-in omnidirectional antennas, the max. antenna gain is 5.2 dBi. ● 6 GHz: four built-in omnidirectional antennas, the max. antenna gain is 5.4 dBi. Bluetooth ● One integrated vertically polarized omnidirectional antenna, the max. antenna gain is 4.6 dBi. | ||
| Port | 1 x 100/1000/2500/5000Base-T RJ45 Ethernet port with auto-negotiation 1 x 5GE combo SFP port, compatibility with 1GE and 2.5GE, and multiplexing with 1 x 100/1000/2500/5000Base-T RJ45 Ethernet port 1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation 1 x RJ45 console port (serial console port) 1 x USB 3.0 (Type-A connector) 1 x Bluetooth 5.1 Zigbee Overvoltage protection on interfaces Possibility of link aggregation | ||
| Status LED | 1 x multi-color system status LED ● AP power-on status ● Software initialization status and upgrade status ● Uplink service interface status ● Wireless user online status ● CAPWAP tunnel timeout ● Specific AP locating | ||
| Button | 1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings. | ||
| Dimensions (W x D x H) | Main unit: 230 mm x 230 mm x 51 mm (9.1 in. x 9.1 in. x 2.1 in.) Shipping: 284 mm x 262 mm x 124 mm (11.2 in. x 10.4 in. x 4.9 in.) | ||
| Weight | Main unit: 1.0 kg (2.20 lbs) Mounting bracket: 0.1 kg (0.22 lbs) Shipping: 1.25 kg (2.76 lbs) | ||
| Mounting | Wall/Ceiling-mount (a mounting bracket is delivered with the main unit) | ||
| Lock option | Kensington lock and securing latch | ||
| Input power supply | The AP supports the following two power supply modes: ● 54 V DC/1.1 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power supply needs to be purchased independently. ● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++). Note: If both DC power and PoE are available, DC power is preferred. | ||
| Power consumption | Maximum power consumption: 40 W ● DC power: 40 W, 2.4 GHz radio 2x2, 5 GHz radio 2x2, 6 GHz radio 4x4, LAN 2 for PoE supply, and USB port enabled ● 802.3bt (PoE++): 40 W, 2.4 GHz radio 2x2, 5 GHz radio 2x2, 6 GHz radio 4x4, LAN 2 for PoE supply, and USB port enabled ● 802.3at (PoE+): 23 W, 2.4 GHz radio 2x2, 5 GHz radio 2x2, 6 GHz radio 4x4, LAN 2 and USB port that fail to provide power for external devices (PoE out disabled of LAN 2 and USB port disabled) ● 802.3af (PoE): 12.95 W, 2.4 GHz radio 1x1, 5 GHz radio 1x1, 6 GHz radio 1x1, LAN 2 and USB port that fail to provide power for external devices (PoE out disabled of LAN 2 and USB port disabled) ● Idle mode: 10.3 W | ||
| Technology(ies) to limit power consumption | LED Turn Off Deep Idle Mode where demand for connectivity stops | ||
| External power supply | When powered by 802.3bt (PoE++), the AP can supply power to an external device. ● The USB port can source 1 A/5 W power to an attached device. ● The LAN 2 port can source 48 V/12.95 W power to an IoT unit. | ||
| Environment | Storage temperature: –40°C to +70°C (–40°F to +158°F) Storage humidity: 5% RH to 95% RH (non-condensing) Storage altitude: < 5,000 m (16,404.20 ft.) at 25°C (77°F) Operating temperature: –10°C to +50°C (14°F to 122°F) Operating humidity: 5% RH to 95% RH (non-condensing) Operating altitude: < 3,000 m (9,842.52 ft.) at 40°C (104°F) At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 166 m (546 ft.), the maximum temperature decreases by 1°C (1.8°F). | ||
| Mean Time Between Failure (MTBF) | 250,000 hours at the operating temperature of 25°C (77°F) | ||
| System memory | 512 MB DRAM, 256 MB flash | ||
| Transmit power | 2.4 GHz ● Max. transmit power: 27 dBm (500 mW) ● Min. transmit power: 7 dBm (5.01 mW) 5 GHz ● Max. transmit power: 30 dBm (1000 mW) ● Min. transmit power: 6 dBm (3.98 mW) 6 GHz ● Max. transmit power: 26 dBm (398 mW) ● Min. transmit power: 9 dBm (7.94 mW) Note: The transmit power adjusted in percentage. The transmit power is limited by local regulatory requirements. | ||
| Radio Frequency Performance | |||
| Frequency Band and Protocol | Data Rate | Max. Transmit Power per Transmit Chain | Max. Receive Sensitivity per Receive Chain |
2.4 GHz, 802.11b | 1 Mbps | 24 dBm | -96 dBm |
| 2 Mbps | 24 dBm | -95 dBm | |
| 5.5 Mbps | 23 dBm | -93 dBm | |
| 11 Mbps | 22 dBm | -89 dBm | |
2.4 GHz, 802.11g | 6 Mbps | 24 dBm | -91 dBm |
| 24 Mbps | 23 dBm | -85 dBm | |
| 36 Mbps | 23 dBm | -80 dBm | |
| 54 Mbps | 21 dBm | -74 dBm | |
2.4 GHz, 802.11n (HT20) | MCS0 | 24 dBm | -90 dBm |
| MCS7 | 20 dBm | -70 dBm | |
2.4 GHz, 802.11n (HT40) | MCS0 | 24 dBm | -90 dBm |
| MCS7 | 20 dBm | -70 dBm | |
2.4 GHz, 802.11ax (HE20) | MCS0 | 24 dBm | -90 dBm |
| MCS11 | 16 dBm | -62 dBm | |
2.4 GHz, 802.11ax (HE40) | MCS0 | 24 dBm | -88 dBm |
| MCS11 | 16 dBm | -60 dBm | |
5 GHz, 802.11a | 6 Mbps | 23 dBm | -91 dBm |
| 24 Mbps | 22 dBm | -85 dBm | |
| 36 Mbps | 22 dBm | -80 dBm | |
| 54 Mbps | 21 dBm | -74 dBm | |
5 GHz, 802.11n (HT20) | MCS0 | 23 dBm | -90 dBm |
| MCS7 | 20 dBm | -68 dBm | |
5 GHz, 802.11n (HT40) | MCS0 | 23 dBm | -88 dBm |
| MCS7 | 20 dBm | -68 dBm | |
5 GHz, 802.11ac (VHT20) | MCS0 | 23 dBm | -90 dBm |
| MCS9 | 18 dBm | -68 dBm | |
5 GHz, 802.11ac (VHT40) | MCS0 | 23 dBm | -88 dBm |
| MCS9 | 18 dBm | -63 dBm | |
5 GHz, 802.11ac (VHT80) | MCS0 | 23 dBm | -85 dBm |
| MCS9 | 18 dBm | -60 dBm | |
5 GHz, 802.11ax (HE20) | MCS0 | 23 dBm | -90 dBm |
| MCS11 | 16 dBm | -60 dBm | |
5 GHz, 802.11ax (HE40) | MCS0 | 23 dBm | -86 dBm |
| MCS11 | 16 dBm | -56 dBm | |
5 GHz, 802.11ax (HE80) | MCS0 | 23 dBm | -83 dBm |
| MCS11 | 16 dBm | -53 dBm | |
5 GHz, 802.11ax (HE160) | MCS0 | 23 dBm | -81 dBm |
| MCS11 | 16 dBm | -51d Bm | |
6GHz 802.11ax (HE20) | MCS0 | 22 dBm | -90 dBm |
| MCS11 | 16 dBm | -60 dBm | |
6GHz 802.11ax (HE40) | MCS0 | 22 dBm | -86 dBm |
| MCS11 | 16 dBm | -56 dBm | |
6GHz 802.11ax (HE80) | MCS0 | 22 dBm | -83 dBm |
| MCS11 | 16 dBm | -53 dBm | |
6GHz 802.11ax (HE160) | MCS0 | 22 dBm | -81 dBm |
| MCS11 | 16 dBm | -51 dBm | |
| Software Specifications | |||
| Applicable software version | RGOS11.9(6)W3B4 or higher | ||
| WLAN | |||
| Max. number of associated STAs | 1,536 (up to 512 STAs per radio) | ||
| Max. number of BSSIDs | 45 (up to 15 BSSIDs per radio) | ||
| Max. number of access points per management cluster | 64 | ||
| Max. number of connected clients per cluster | 2000 | ||
| Max. number of WLAN IDs | 16 | ||
| STA management | SSID hiding Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote Intelligent Perception Technology (RIPT) Intelligent STA identification technology Intelligent load balancing based on the STA quantity or traffic | ||
| STA limiting | SSID-based STA limiting Radio-based STA limiting | ||
| Traffic limiting | Per User Per SSID Per Device Radio | ||
| Bandwidth limiting | STA/SSID/AP-based rate limiting | ||
| Wi-Fi signal | Unauthorized Wi-Fi signal location, presentation by category, and containmen | ||
| CAPWAP | IPv4/IPv6 CAPWAP Layer 2 and Layer 3 topology between an AP and an AC An AP can automatically discover the accessible AC. An AP can be automatically upgraded through the AC. An AP can automatically download the configuration file from the AC. CAPWAP through NAT | ||
| Data forwarding | Centralized and local forwarding | ||
| Wireless roaming | Layer 2 and Layer 3 roaming | ||
| Wireless locating | MU and TAG device locating | ||
| Security and Authentication | |||
| Authentication and encryption | Remote Authentication Dial-In User Service (RADIUS) PSK, 802.1x and web authentication VSAs QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3-Enterprise, WPA3-Personal | ||
| Data frame filtering | Allowlist, static blocklist, and dynamic blocklist | ||
| WIDS | Wireless Intrusion Detection System(WIDS) User isolation Rogue AP detection and containment Adhoc, detect and contain adhoc device Config, detect and contain devices that match the SSID block list and static attack list Rogue, detect and contain any device with signal strength higher than threshold Ssid, detect and contain same SSID devices on different controller All, detect and contain all 4 cases listed above | ||
| ACL | IP standard ACL, MAC extended ACL, IP extended ACL, and expert-level ACL IPv6 ACL Time range-based ACL ACL based on a Layer 2 interface ACL based on a Layer 3 interface Ingress ACL based on a wireless interface Dynamic ACL assignment based on 802.1X authentication (used with the AC) | ||
| CPP | CPU Protect Policy (CPP) | ||
| NFPP | Network Foundation Protection Policy (NFPP) | ||
| Rogue AP detection and containment | Support | ||
| Multiple Pre Shared Key (MPSK) or equivalent | Support | ||
| 802.11mc (FTM) distance measurement standard | Support | ||
| Routing and Switching | |||
| MAC | Static and filtered MAC addresses MAC address table size: 2,048 Max. number of static MAC addresses: 2,048 Max. number of filtered MAC addresses: 2,048 | ||
| Ethernet | Jumbo frame length: 1,518 Full-duplex and half-duplex modes of interfaces IEEE802.1p and IEEE802.1Q Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP) | ||
| VLAN | Interface-based VLAN assignment Max. number of SVIs: 200 Max. number of VLANs: 4,094 VLAN ID range: 1–4,094 | ||
| ARP | ARP entry aging, gratuitous ARP learning, and proxy ARP Identification of IP address conflict among downlink users Max. number of ARP entries: 2,048 ARP check | ||
| IPv4 services | Static and DHCP-assigned IPv4 addresses(DHCP service) NAT, FTP ALG and DNS ALG | ||
| IPv6 services | IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 ping IPv6 DHCP client DNSv6 client TFTPv6 Client | ||
| IP routing | IPv4/IPv6 static route Max. number of static IPv4 routes: 1,024 Max. number of static IPv6 routes: 1,000 | ||
| Multicast | Multicast-to-unicast conversion | ||
| VPN | PPPoE client IPsec VPN | ||
| Network Management and Monitoring | |||
| Network management | NTP server and NTP client SNTP client SNMPv1/v2c/v3 Fault detection and alarm Information statistics and logging Syslog Network discovery services support: Bonjour, UPnP, DLNA Device discovery | ||
| Network management platform | Web management (Eweb) Administration of the access point cluster via a secure web interface in HTTPS | ||
| User access management | Console, Telnet, SSH, FTP client, FTP server, and TFTP client | ||
| DPI | Support | ||
| Chain mesh | Support | ||
| Star mesh | Support | ||
| Access point cluster administration and management options | Administration of the access point cluster via a secure web interface in HTTPS Administration with SNMP-based software Administration with CWMP-based software Administration of the access point cluster via the administration console of the Wi-Fi segment | ||
| Switchover among Fat, Fit, and cloud modes | When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet mode. When the AP works in cloud mode, it can be managed through Ruijie Cloud. | ||
| Value-added Software | |||
| Intelligent O&M | |||
| Experience | Network operation analysis, such as device stability and signal coverage Measuring users' network experience based on indicators such as the latency, packet loss, signal strength, and channel utilization, and visualizing results of the network experience Statistics on the number of online and offline failures of STAs associated with different APs, average signal strength, and other parameters VIP monitoring and alarm, and custom alarm thresholds STA global experience map and experience coverage evaluation based on the time range STA access protocol replay and fine-grained STA fault diagnosis Note: To support the preceding functions, ensure that the AP works in Fit mode. | ||
| Network optimization | Network performance optimization, including one-click network optimization and scenario-based optimization Client steering to cope with roaming stickiness, and experience indicator comparison Client steering to cope with remote association, and experience indicator comparison One-click diagnosis – analyzing problems and providing suggestions | ||
| Big data | Baseline analysis – recording the configuration, version, and other changes, and tracking network KPI changes Time capsule – analyzing the device version and configuration change history | ||
| Regional analysis | Batch generation of building floor information – uploading floor plans, and dragging and dropping AP positions | ||
| One-click report | One-click health report – generating a report on the overall operation of a network | ||
| Security radar | Unauthorized Wi-Fi signal location, presentation by category, and containment | ||
| Cloud Management | |||
| Management and maintenance | Uniformly connecting, managing, and maintaining APs, ACs, and other devices, batch device configuration and upgrade, and other functions Deployment through Zero Touch Provisioning (ZTP) – creating configuration templates and automatically applying configured templates One-click discovery of the wired and wireless network topology and topology generation | ||
| Cloud Authentication | |||
| Authentication mode | SMS authentication, fixed account authentication, one-click authentication, Facebook authentication, Instagram authentication, voucher authentication, and other authentication modes Authentication implemented in the cloud, without the need to deploy the local authentication server | ||
| Customized portal | Customized Portal authentication page for mobile phones and PCs | ||
| SMS gateway | Interconnection with SMS gateways of GUODULINK and Alibaba Cloud | ||
| Platform Capabilities | |||
| Big data capabilities | Mainstream persistence solutions based on Hadoop, MongoDB, and MySQL, providing distributed storage capabilities Spark-based big data computing capabilities Data warehouse building based on Hive, and data model conversion, integration, and other functions | ||
| Hierarchy and decentralization | Authorizing different applications for different users to meet service needs of different departments Granting operation permissions to administrators in different scenarios | ||
| System management | Account operation, authorization configuration, email configuration, configuration backup, exception alarms, and other system management functions | ||
| Regulatory Compliance | |||
| Regulatory compliance | EN 55032 EN 55035 EN 61000-3-3 EN IEC 61000-3-2 EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 300 328 EN 301 893 EN 300 440 FCC Part 15 ETSI EN 303 687 EN IEC 62311 IEC 62368-1 EN 62368-1 | ||
Una vez que el usuario haya visto al menos un producto, este fragmento será visible.