Radwin RW-5200-2250 Sector Base Station
Radwin RW-5200-2250 Sector Base Station
Radwin - RWN-BS5200-2250EXBase Station 5GHz MIMO 2X2, external antena connector 2 x N, 200 Mbps
RWN-5200-2250
Base Station 5GHz MIMO 2X2, external antena connector 2 x N, 200 Mbps
RADWIN RW-5200-2250 is a Sector Base Station Radio unit, providing up to 200Mbps net aggregate throughput and delivering access connectivity for up to 16 Subscriber Units (HSUs). RW-5200-2250 supports 5.X GHz and complies with ETSI regulation. RADWIN RW-5200-2250 is connectorized for use with an external antenna.
- High Capacity sector Base Station
- Up to 200 Mbps aggregated throughput
- Guaranteed Service level Agreement (SLA) per HSU
- Outstanding short and constant latency
- Support up to 16 HSUs
- Long range – up to 40 km/25 miles
- Single radio supporting multiple bands
- Advanced MIMO, OFDM and Diversity technologies
- Excellent operation in nLOS and NLOS scenarios
- Robust and reliable to operate in tough conditions, extreme temperatures
- Ease of operation and maintenance
PoE no incluided
Specifications
|
Architecture |
Outdoor Unit Connectorized for External Antenna |
|
|
PoE to ODU Interface |
Outdoor CAT-5e; Maximum cable length: 100m for 10/100BaseT and 75m for 1000BaseT |
|
|
RADIO |
||
|
Capacity |
200 Mbps net aggregate throughput @ 40MHz |
|
|
100 Mbps net aggregate throughput @ 20MHz |
||
|
Subscriber Units (SUs) |
support Up to 16 HSUs |
|
|
Range Up to |
40 km / 25 miles |
|
|
Channel Bandwidth Configurable: |
10 , 20 and 40MHz |
|
|
Modulation |
2x2 MIMO-OFDM (BPSK/QPSK/16QAM/64QAM) |
|
|
Adaptive Modulation & Coding |
Supported |
|
|
Bandwidth allocation |
Symmetric and Asymmetric |
|
|
DFS |
Supported |
|
|
End to End Latency Typical: |
3.5msec @ 2 HSUs; 15msec @ 16 HSUs |
|
|
Diversity |
Supported |
|
|
Spectrum Viewer |
Supported |
|
|
Max Tx Power |
25 dBm |
|
|
Duplex Technology |
TDD |
|
|
Error Correction |
FEC k = 1/2, 2/3, 3/4, 5/6 |
|
|
Encryption |
AES 128 |
|
|
Ethernet Interface |
10/100BaseT, 1000BaseT (supported via indoor PoE device RW-9924-101X) |
|
|
Layer 2 |
Bridging learning of 5K MAC addresses |
|
|
QoS |
Supported Packet classification to 4 queues according to 802.1p and Diffserv |
|
|
VLAN |
Supported 802.1Q, 802.1P, QinQ |
|
|
TDD Intra Site Synchronization |
Supported |
|
|
TDD Inter Site Synchronization |
Supported through common GPS receiver per site |
|
|
SUPPORTED BANDS RW-5200-2250 |
||
|
5.4 GHz ETSI |
5.475 - 5.720 GHz |
ETSI EN 301 893 |
|
5.8 GHz ETSI |
5.725 - 5.875 GHz |
ETSI EN 302 502 |
|
5.3 GHz ETSI |
5.150 - 5.350 GHz |
ETSI EN 301 893 |
|
MECHANICAL |
||
|
ODU Dimensions |
19.5(w) x 27.0(h) x 8.0(d) cm |
|
|
ODU Weight |
1.8 kg / 3.6 lbs |
|
|
POWER |
||
|
Power Feeding |
Power provided over ODU-IDU cable using PoE |
|
|
Power Consumption |
<25W |
|
|
ENVIRONMENTAL |
||
|
Operating Temperatures |
-35ºC to 60ºC / -31ºF to 140ºF |
|
|
Humidity 100% condensing |
IP67 (totally protected against dust and against immersion up to 1m) |
|
|
SAFETY |
FCC/IC (cTUVus) UL 60950-1, UL 60950-22, CAN/CSA C22.2 60950-1, CAN/CSA C22.2 60950-22 |
|
|
ETSI EN/IEC 60950-1, EN/IEC 60950-22 |
||
|
EMC |
||
|
FCC 47 CFR Class B, Part15, Subpart B |
||
|
ETSI EN 300 386, EN 301 489-1, EN 301 489-4 |
||
|
CAN/CSA-CEI/IEC CISPR 22-04 Class B |
||
|
AS/NZS CISPR 22-2004 Class B |
||
Una vez que el usuario haya visto al menos un producto, este fragmento será visible.